Photoelectric weft detection device for water jet loom When water-jet looms use high-voltage discharge weft detection devices to weave twisted fabrics…

Electronic let-off system for water jet loom The electronic warp let-off of the water-jet loom can cooperate with the winding mechanism according to t…

Control system electronic weft storage device The electronic weft storage device can wrap the weft around the length measuring drum according to pre-s…

How the control system works The circuit diagram of W-2200 electronic control board is shown in Figure 3-44. After the loom is connected to the power …

Control system electric control box The electric control box is the heart of the water-jet loom control system. All parameters of the loom are sent to…

Control system timing signals The timing signals of water-jet looms are generally controlled by proximity switches or fully electric encoders. At pres…

Control system operating device The operating device of the water-jet loom consists of button boxes installed on the left and right sides of the loom….

Control system weft detection The weft detection of water-jet looms, commonly known as “weft detection device”, mainly has the following t…

Control system fault detection and automatic shutdown device The water-jet loom is equipped with multiple fault detection and self-stop devices to ens…

Control system loom transmission Due to its simple weft insertion system and high strength of warp yarn raw materials, water-jet looms have high rotat…

Control system overview The water-jet loom control system usually uses the CPU as the control center to control the planning, operation, forward rotat…