Reducing treatment of small pattern suede fabric

  Suede is made of island-type ultrafine polyester silk, and then after desizing, refining, relaxing, pre-shaped fiber opening, grinding and dyeing, i…

Research on plasma technology in the field of textile dyeing and finishing processing

  At the 3rd International Conference on Printing and Dyeing Processing in Kyoto, Dr. Volkmar v. Arnim of ITV Denkendorf of Germany published a specia…

Yarn card

  Yao card—The warp and weft yarns are all single yarns. The yarn cards belong to khaki fabrics. The warp and weft yarns of the yarn cards are a…

Wool fabric finishing and finishing agent

  This article briefly introduces the mechanism and finishing process of the finishing agent used for soft finishing, oil-repellent and anti-fouling, …

Improve the flame retardancy of cotton and polyester velvet fabrics with phosphorous polyester polyhydroxy acid

  In addition to giving cotton fabrics no ironing properties, polypolyhydroxy acid can also improve the flame retardancy of cotton-polyester-cut blank…

Common defects in nylon dyeing and their prevention and remedies

 1 Introduction  Nylon is a hydrophobic fiber, which contains amino and carboxylic groups [1]. It can be dyed with dispersed dyes, acid dyes, and espe…

3. Things to note when making a causal analysis chart

(1)Investigation and research, hold a Zhuge Liang meeting. Please attend the appointment and listen to different opinions. (2)Big reasons can be consi…

1. Cause of formation

1. Improper fabric process design and configuration (1) Improper selection of the pen number: After the total number of pens is determined, the layout…

Shuttle pressure shuttle and shuttle (the shuttle is unstable)

When the shuttle is flying in the shuttle, the rolling shuttle and the shuttle will be generated due to improper position of the side support and hang…

2. Side support defect [cause of formation)

The warp and weft yarns of the fabric located at the edge support are rolled and broken by 1 to 2 pieces, forming a yarn body that is easily broken, a…

Square eye

A square eye is called a square eye, as shown in Figure 2-70. It is formed by the fact that the tensions of the upper and lower layers of warp yarns a…

Causes of formation

(1) The position of the rear beam (C28) is too low. After opening, the tension difference between the upper and lower warp yarns is too small. When th…

Home
Product
Phone
Contact
Search